Chauvet DJ GigBAR Bridge Beam ILS
The Bridge Beam ILS is the moving-head step up in the GigBAR line: two beam moving heads sweep 540 degrees of pan and 270 of tilt, an RGBW LED ring wraps the bar for a wash effect, and a pair of wash fixtures fill in color behind the beams. All of it is pre-rigged on one bar, so it goes up as a single fixture instead of a truss full of separate heads.
Control is 3, 24 or 60-channel DMX over 3-pin XLR, or the fixture links wirelessly over 2.4 GHz to other Chauvet ILS gear with no data cable at all - point a GigBAR ILS controller at the room and every linked fixture follows. The moving heads throw a tight 5 degree beam at nearly 25,000 lux from 2 meters, while the wash heads spread to 20 degrees for fill.
| Fixtures | Moving head beam x2, LED ring, wash x2 - one bar |
|---|---|
| Light Source (Moving Head) | 2 LEDs RGBW, 80 W total, 50,000-hour life |
| Light Source (Wash) | 4 LEDs RGBAW+UV, 40 W total, 50,000-hour life |
| Pan / Tilt | 540° / 270° |
| Beam Angle | 5° (moving head), 20° (wash) |
| DMX Channels | 3, 24 or 60; 3-pin XLR |
| Wireless Linking | 2.4 GHz ILS |
| Power / Weight | 147 W, 1.2 A @ 120 V, 60 Hz; 16.4 lb (7.5 kg) |












