Blaze Audio PowerZone Connect 1002 1000 W 2-Channel Install Amplifier

The PowerZone Connect 1002 is the two-channel sibling to the 1502, delivering 1000 watts of total system power for zones that need headroom more than channel count. Run stereo it produces 2 x 500 W at 2 or 4 ohms; bridged it puts the full 1000 W into a single 4-ohm load, or a matching 1000 W into a 70V or 100V line. It ships in a 2U chassis at just over 13 pounds.

Built-in PowerZone Control DSP runs full-matrix routing and processing from a web browser, with no software install needed. Power consumption is rated at 350 W, and this model does not include Dante; for audio-over-IP, step up to the D-suffixed PowerZone Connect models.

Total System Power	1000 W
Output Power at 2 ohms	2 x 500 W (stereo)
Output Power at 4 ohms	2 x 500 W (stereo), 1 x 1000 W (bridged)
Output Power at 8 ohms	2 x 250 W (stereo), 1 x 1000 W (bridged)
Output Power at 70V / 100V	1 x 1000 W (bridged)
Power Consumption	350 W
Dante Compatibility	No
Form Factor / Weight	2U rack, 17.3 x 3.5 x 12.6 in (439 x 89 x 320 mm) / 13.01 lb (5.9 kg)