Vaddio RoboSHOT IW Clear Glass OneLINK Bridge System (Primed)

The RoboSHOT IW (In-Wall) hides a full HDBaseT PTZ camera inside a recessed, fully enclosed frame so a room captures cleanly without a camera protruding into the space. This is the Clear Glass model in a primed frame: the cover is transparent at all times rather than switching opacity, and the front panel ships ready to paint so it can be finished to match the wall. The recessed, ADA-compliant design captures HD 1080p with a 10x optical zoom and a 73-degree wide field of view, ideal where interior design, cleanliness, or theft deterrence rules out an exposed camera.

This system pairs the camera with a OneLINK Bridge, which carries power and control down one Cat-5e cable and fans the feed out to uncompressed USB 3.0, HDMI, and HD-SDI with two channels of balanced audio for BYOD rooms. The camera has a single OneLINK/HDBaseT connector and no physical switches, so all setup runs through the web interface, with Telnet and RS-232 for integration. It ships with the RoboSHOT IW camera and back-box, a primed clear-glass front frame, left and right interior side plates, drywall mounting hardware, the IR Remote Commander, the OneLINK Bridge interface, a 48V power supply, an EZCamera RS-232 adapter, four Phoenix connectors, a 6 ft USB 3.0 cable, and an Installation Guide.