Sennheiser MK 4 Cardioid Condenser Microphone
The MK 4 is Sennheiser's large-diaphragm cardioid condenser for home, project, and professional studios, built around a 1-inch true condenser capsule that delivers a warm, powerful sound on vocals, acoustic guitar, piano, and amp cabinets. Its cardioid pattern focuses on the source in front of the mic while rejecting off-axis room sound and spill, which keeps a home or project studio recording clean without expensive room treatment. A 20 Hz to 20,000 Hz frequency response captures the full detail of a performance from low warmth to airy top end.
A low 10 dB(A) self-noise floor means the MK 4 stays quiet on delicate acoustic sources and whispered vocal takes where a noisier capsule would show its hand. The rugged housing and internal shock decoupling keep it stable on a stand without picking up handling or floor vibration, and it ships ready to mount with a standard microphone clip. It requires standard P48 phantom power from an interface, mixer, or preamp and connects over a 3-pin XLR, making it a straightforward drop-in for a first serious studio microphone or a reliable workhorse in a larger space.
- Dimension⌀ 57 mm x 160 mm
- Pick-up patterncardioid
- Frequency response20 to 20,000 Hz
- Sensitivity25 mV/Pa
- Dynamic range130 dB
| Transducer principle | externally polarized microphone |
|---|---|
| Diameter of diaphragm | 25.4 mm / 1" |
| Acoustic operating principle | pressure gradient transducer |
| Pick-up pattern | |
| Frequency response | 20 to 20,000 Hz |
| Sensitivity | 25 mV/Pa |
| Max. SPL | 140 dB |
| Equivalent noise level | A-weighted: 10 dB(A), CCIR-weighted: 20 dB |
| Dynamic range | 130 dB |
| Nominal impedance | approx. 50 Ω |
| Min. terminating impedance | 1 kΩ |
| Phantom powering | 48 V ±4 V (P48, IEC 61938) |
| Current consumption | 3.1 mA |
| Temperature range | Operation: 0 °C to +40 °C, Storage: -10 °C to +70 °C |
| Dimension | ⌀ 57 mm x 160 mm |
| Weight | 485 g |

- MZQ 4 Microphone clip
- Pouch
- Quick guide










