RCF HDL 26-A Active Two-Way Line Array Module
The HDL 26-A is the smallest module in RCF's HDL touring line, and it exists for the jobs where a full-size array will not fit or will not fly. Two 6-inch neodymium woofers and a 1.5-inch compression driver on a 3-inch voice coil share a 2000 W Class-D amplifier, and the pair reaches 133 dB at one meter from a cabinet that weighs 29.76 lbs. Coverage is 100 degrees horizontal by 10 degrees vertical, so a short hang covers a club, a corporate ballroom, or a house of worship balcony without spraying the walls.
The composite cabinet carries the same integrated rigging as its larger siblings: angles are set on the ground and lock automatically as the array is pulled up. On-board RDNet gives you EQ, delay, and preset control over Ethercon from a laptop, and the FiRPHASE filters hold phase flat across the crossover at 750 Hz. Pair it with the HDL 35-AS flyable subwoofer when the program needs bottom below 55 Hz. Available in black or white.
| Frequency Response | 55 Hz - 20000 Hz |
|---|---|
| Max SPL at 1 m | 133 dB |
| Horizontal Coverage | 100 degrees |
| Vertical Coverage | 10 degrees |
| Compression Driver | 1 x 1.5-inch neo, 3.0-inch v.c |
| Woofer | 2 x 6.0-inch neo, 2.0-inch v.c |
| Total Power | 2000 W Peak, 1000 W RMS |
| Crossover | 750 |
| Inputs | XLR, RDNet Ethercon |












