OConnor Ultimate 1040 Fluid Head and 30L Tripod System
This is the complete 1040 package: the Ultimate 1040 fluid head, the 30L two-stage carbon fiber tripod, a spreader and a soft carrying case. The head carries 0 to 45 lb (0 to 20 kg) at a 5 in (125 mm) centre of gravity and tilts plus or minus 90 degrees, with OConnor's sinusoidal counterbalance holding true balance at every point in that range, not just at the middle. Counterbalance runs down to zero, which is what makes the same head usable under a stripped mirrorless body and a built-out cine camera on the same day.
The 30L is twist resistant and quick to set, with a visible clamp lockdown so an assistant can see at a glance that the legs are locked. Both spreader options are in the package list below: the floor spreader version gives you the widest stable footprint on a stage, and the mid-level version, which also ships with rubber feet, is faster to level on stairs or rough ground. The head arrives fitted with the Large Euro touch-and-go quick release, a 12 in pan handle with a 30 degree bend and an 11.5 in extension.
| Payload | 0 - 45 lb (0 - 20 kg) at 5 in (125 mm) centre of gravity |
|---|---|
| Plate | Large Euro 'touch and go' quick release |
| Pan Handle | 12 in with 30 degree bend, plus 11.5 in extension |
| Tilt Range | +/- 90 degrees |
| Counterbalance | Sinusoidal, full 180 degree tilt range from zero to maximum payload |
| Base Options | Interchangeable to 150mm, Mitchell, 4-bolt, 3-bolt or Quickfix |
| Tripod | 30L two-stage carbon fiber |
| System Height Range | 29.1 - 70.5 in (74 - 179 cm) with floor spreader; 29.3 - 69.1 in (75 - 176 cm) with mid-level spreader |
| Transport Length | 38.2 in (97 cm) |
| System Weight | 24.7 lb (11.2 kg) with floor spreader; 23.6 lb (10.7 kg) with mid-level spreader |
| System Includes | C1265-0001 head package, C1251-0001 tripod, spreader, C1254-0001 soft carrying case |












