Lewitt CONNECT 2 USB-C Audio Interface

CONNECT 2 is the single-microphone version of Lewitt's interface line, for a solo podcaster, singer-songwriter, or streamer who needs one good channel rather than six. The preamp gives 0 to 72 dB of gain with -129 dBV(A) equivalent input noise and 118 dB(A) of dynamic range, which is enough headroom and enough quiet to sit a low-output dynamic mic on a spoken voice.

The instrument input is a differential Hi-Z 1/4 inch with a ground loop break, so a guitar plugged in alongside a laptop on a charger does not hum. Outputs are two balanced 1/4 inch for monitors plus stereo headphone jacks on both 1/4 inch and 3.5 mm. Conversion is 24-bit at up to 96 kHz over a single bus-powered USB-C connection, with loopback and an ASIO driver for Windows. The unit is 151 x 110 x 41 mm and 394 g.

Microphone Input	1 x balanced 3-pin XLR
Instrument Input	1 x Hi-Z 6.3 mm jack, differential with ground loop break
Outputs	2 x 6.3 mm balanced speaker; 1 x 6.3 mm stereo headphone, 1 x 3.5 mm stereo headphone
Preamp Gain	0 - 72 dB
Equivalent Input Noise	-129 dBV (A)
Dynamic Range	118 dB (A)
THD / Max Input	0.001%; 15.8 dBV
Frequency Response	20 Hz - 20 kHz +/- 0.1 dB
Phantom Power	48 V, switchable
Conversion / Connection	24-bit, 44.1 / 48 / 96 kHz; USB-C Class 2.0, bus powered, loopback and ASIO
Dimensions / Weight	151 x 110 x 41 mm; 394 g