HK Audio FINEO FO 8 Passive 8 inch Install Speaker
The FINEO FO 8 pairs an 8-inch Sica cone driver on a 1.75-inch voice coil with a 1-inch Sica compression driver on a BEM-optimized constant directivity horn borrowed from the touring CONTOUR X series. The horn rotates, so the 80 by 60 degree pattern stays correct whether the cabinet hangs upright or on its side, and coverage lands on the audience rather than the walls and ceiling.
Power handling is 200 W RMS at 8 ohms for 119 dB peak, with usable response from 72 Hz. Connection is NL4 Speakon in and parallel out, and the MDF cabinet carries M8 points on the sides, bottom and back plus a VESA MIS-D 100 x 100 mm pattern for wall plates. HK Audio publishes filter sheets for Lab.gruppen, Powersoft, QSC Q-SYS, BSS, Symetrix and Biamp Tesira, so the box drops into an existing DSP rack without guesswork. Available in jet black or signal white.
| Concept | Passive 2-way mid/high unit, bass reflex |
|---|---|
| Power Handling | 200 W RMS / 400 W program / 800 W peak, 8 ohms |
| Max SPL Average / Peak | 116 dB / 119 dB |
| Frequency Range | 72 Hz - 20 kHz (-6 dB), 69 Hz - 20 kHz (-10 dB) |
| Dispersion | 80 x 60 degrees, rotatable horn |
| Components | 1 x 8 inch Sica cone (1.75 inch coil), 1 x 1 inch Sica compression driver |
| Connections | 1 x NL4 Speakon in, 1 x NL4 Speakon parallel out |
| Weight | 11.0 kg (24.3 lb) |
| Order Code | FINEO-FO-8-BLK-U |









