Teradek RT CTRL.1 Single-Axis Wireless Lens Controller
CTRL.1 is the single-axis hand unit in the Teradek RT system. It drives focus, iris or zoom, and it will work alongside another RT unit holding a different axis on the same lens, so two operators can split the work without a second receiver. It talks to every RT motor and receiver in the range.
The controller has a large focus knob, an OLED display for lens data, and built-in lens mapping that auto-calibrates a lens to a pre-marked focus ring so an assistant is not re-marking after every swap. Paired with a SmallHD monitor it puts focal distance and iris on the picture as an overlay. A removable Canon LP-E6 battery runs it for up to 36 hours.
| Construction | Aerospace-grade aluminum billet |
|---|---|
| Mountability | M6 Rosette block mount, / 4 x M3 mounting holes |
| Dimensions | 3.6"W x 3.1"D x 5.9"H / [91mm x 81mm x 150mm] |
| Weight | 17 oz (482g) |
| Power Input | Controller includes slot for a Canon LP-E6 Battery: 6.2 to 8.4 V / USB Port: 4.75 to 9 V (maximum) |
| Connectors | 1 x 5-pin locking connector for Wired Mode |
| Teradek Part # | 15-0043 |
| Manufacturer | Teradek (Creative Solutions / Videndum) |














