Sennheiser XSW-D Presentation Base Set Digital Wireless System
The XSW-D Presentation Base Set brings clip-on 2.4 GHz wireless to a lectern mic or a PA input for meetings, lectures, and houses of worship, with no frequency coordination required. The transmitter and receiver are paired at the factory, so setup is plug in and go.
aptX Live encoding keeps latency under 4 ms and worldwide 2.4 GHz operation means the same set works across regions. A Li-Ion battery runs up to 5 hours per charge with roughly a 3 hour recharge, and the receiver's mic-level or line-level output switch lets it feed a mixer or PA input directly.
- OutputSwitchable mic-level / line-level
- RangeUp to 75 m (250 ft) in optimal conditions
- Frequency response3.5 mm Jack/XLR: 80 to 18,000 Hz
- BatteryLi-Ion, up to 5 hours; approx. 3 hour recharge
- Battery lifeup to 5 h
| RF Band | 2,400 - 2,483.5 MHz |
|---|---|
| Range | Up to 75 m (250 ft) in optimal conditions |
| Audio Bandwidth | 80 - 18,000 Hz |
| Latency | < 4 ms |
| Codec | aptX Live |
| Battery | Li-Ion, up to 5 hours; approx. 3 hour recharge |
| Output | Switchable mic-level / line-level |
| Frequency response | 3.5 mm Jack/: 80 to 18,000 Hz |
| Battery life | up to 5 h |

- XSW-D 3.5 mm (1/8") transmitter
- XSW-D XLR Male receiver
- Beltpack clip
- USB-A to USB-C charging cable
- Colored stickers for labelling
- Quick guide












