Sennheiser logo
Shop All Sennheiser

Sennheiser XSW-D XLR Digital Wireless System

The XSW-D XLR turns any wired mic or line source wireless without a bodypack: the female-XLR transmitter clips onto a handheld mic's output, and the male-XLR receiver plugs into a mixer or camera input, so the two units drop into an existing XLR signal chain in place of a cable. Factory pairing means there is no frequency to set.

aptX Live encoding keeps latency under 4 ms, and worldwide 2.4 GHz operation makes it usable anywhere without a license. A Li-Ion battery runs up to 5 hours per charge, and the pieces are sold as a complete Base Set or as a standalone Female transmitter or Male receiver to expand or replace an existing XSW-D XLR setup.

  • ConnectorXLR-3
  • RangeUp to 75 m (250 ft) in optimal conditions
  • Frequency response3.5 mm Jack/XLR: 80 to 18,000 Hz
  • BatteryLi-Ion, up to 5 hours; approx. 3 hour recharge
  • Battery lifeup to 5 h
RF Band2,400 - 2,483.5 MHz
RangeUp to 75 m (250 ft) in optimal conditions
Audio Bandwidth80 - 18,000 Hz
Latency< 4 ms
CodecaptX Live
BatteryLi-Ion, up to 5 hours; approx. 3 hour recharge
Connector-3
Frequency response3.5 mm Jack/XLR: 80 to 18,000 Hz
Battery lifeup to 5 h
SoundAcademy XSW-D Part 1 of 5 - Introduction to XSW-D
SoundAcademy XSW-D Part 2 of 5 - Sets
5items in the box
  • XSW-D Female XLR transmitter
  • XSW-D XLR Male receiver
  • USB-A to USB-C charging cable
  • Colored stickers for labelling
  • Quick guide