Sennheiser SK 6000 Digital 6000 Bodypack Transmitter
The SK 6000 is Sennheiser's Digital 6000 bodypack transmitter, built for large-scale productions where dozens of wireless channels need to coexist in the same RF spectrum without interference. Its intermodulation-free design and Link Density Mode pack up to 5 links into every 1 MHz of bandwidth, letting a large musical or broadcast production run far more channels than a conventional analog system in the same space.
A magnesium housing keeps it durable without adding bulk, and it accepts clip-on microphones like the MKE 1, MKE 2, and MKE 40, or headsets like the HSP 2, HSP 4, and SL Headmic. AES 256 and Digital 9000 encryption protect the RF link, and a BA 61 lithium-ion pack runs up to 6.5 hours per charge. It pairs with the EK 6042 or EM 9046 receiver in Long Range mode, or the EM 6000 in Link Density mode.
- Dimensions (H × W × D)76 × 62 × 20 mm (with BA 61 battery pack)
- RF output powerLR: 25 mW rms; LD: 3.5 mW rms
- Input impedanceMic: 22 kΩ; Line: 1 MΩ
- Mic / Line input3-pin audio socket
- Antenna outputCoaxial socket
| Frequency Range (SK 6000 A1 - A4) | 470 - 558 MHz |
|---|---|
| Frequency Range (SK 6000 A5 - A8) | 550 - 638 MHz |
| Modulation Scheme | Digital modulation: Long Range Mode (LR), Link Density Mode (LD) |
| Audio Codec | LR mode: SeDAC (Sennheiser Digital Audio Codec); LD mode: SePAC (Sennheiser Performance Audio Codec) |
| Switching Bandwidth | 88 MHz |
| Frequency Stability | < 5 ppm |
| Tuneability | 25 kHz steps |
| Encryption | AES 256 and Digital 9000 encryption |
| Lower Cut-Off-Frequency (-3 dB) | Mic: adjustable, 30 Hz, 60 Hz, 80 Hz, 100 Hz, 120 Hz; Line: 30 Hz, 60 Hz, 80 Hz, 100 Hz, 120 Hz |
| RF Output Power | LR: 25 mW rms; LD: 3.5 mW rms |
| Audio Frequency Response | LR: 30 Hz to 20 kHz (3 dB); LD: 30 Hz to 14 kHz (3 dB) |
| Audio Gain | Mic: adjustable in 3 dB steps from 0 dB to +42 dB; Line: adjustable in 3 dB steps from -6 dB to +9 dB |
| Input Impedance | Mic: 22 kΩ; Line: 1 MΩ |
| Mic / Line Input | 3-pin audio socket |
| Instrument Cable Emulation | Adjustable cable length with 3 steps |
| Antenna Output | Coaxial socket |
| Operating Time | 6.5 h (with BA 61 battery pack) |
| Dimensions (H × W × D) | 76 × 62 × 20 mm (with BA 61 battery pack) |
| Weight | Approx. 147 g (with BA 61 battery pack and beltclip) |
| Source | Spec sheet (PDF) on sennheiser.com |










