Kramer TP-789Rxr 4K60 4:2:0 HDMI Bidirectional PoE Receiver with Ethernet, RS-232 & IR over Extended-Reach HDBaseT
TP-789Rxr is a high-performance, extended-reach HDBaseT receiver for 4K60Hz (4:2:0) HDMI, Ethernet, RS-232 and IR signals and 2-way powering over twisted pair. It extends video signals to up to 100m (330ft) over Kramer copper cables at up to 4K@60Hz (4:2:0) 24bpp video resolution and provides even further reach for lower HD video resolutions. This receiver either provides power over the copper extension cable to a POE (Power over Ethernet) acceptor device such as a PoE wall-plate, or accepts PoE through the extension cable from a PoE provider remote device, as auto-sensed by the receiver. High Performance Standard Extender - Professional HDBaseT extender for providing extended-reach signals and powering over twisted-pair copper infrastructures. TP-789Rxr is a standard extender that can be connected to any market-available HDBaseT-compliant extension product. For optimum extension reach and performance, use recommended Kramer cables. Bidirectional PoE (Power over Ethernet) - Auto-senses the extension line PoE status and either provides power to a remote POE acceptor such as a PoE wall-plate, or accepts power from a remote PoE provider such as a PoE matrix. HDMI Signal Extension - Supports deep color, x.v.Color, lip sync, HDMI uncompressed audio channels, Dolby TrueHD, DTS-HD, 2K, 4K, and 3D as specified in HDMI 2.0. EDID and CEC signals are passed through from the source to the display. I-EDIDPro Kramer Intelligent EDID Processing - Intelligent EDID pass-through algorithm that ensures Plug and Play operation for HDMI source and display systems. Multi-channel Audio Extension - Up to 32 channels of digital stereo uncompressed signals for supporting studio-grade surround sound. Ethernet Extension - Ethernet interface data flows in both directions, allowing extension of up to 100Mbps Ethernet connectivity for LAN communication and device control. Bidirectional RS-232 Extension - Serial interface data flows in both directions, allowing data transmission and device control. Bidirectional Infrared Extension - IR interface data flows in both directions, allowing remote control of peripheral devices located at either end of the extended line. Cost-Effective Maintenance - Status LED indicators for HDMI and HDBT ports and PoE feed status facilitate easy local maintenance and troubleshooting. Local firmware upgrade via RS-232 connection ensures lasting, field-proven deployment. Easy Installation - Single cable connectivity for both HDBaseT signals and power. Compact DigiTOOLS fan-less enclosure for dropped-ceiling mounting, or side-by-side mounting of 3 units in a 1U rack space with the recommended rack adapter.
- SizeDigiTOOLS
- Storage Temperature-40 deg to +70C (-40 deg to 158F)
- Max. Resolution4K@60Hz (4:2:0) 24bpp resolution
- Consumption370mA
- Consumption with PoE13Watt
| 1 HDBT | On a female RJ-45 connector |
|---|---|
| 1 HDMI | On a female connector |
| 1 IR | On a 3.5mm mini jack for IR link extension |
| 1 RS-232 | On a 3-pin terminal block connector for serial link extension and device firmware upgrade |
| 1 100BaseT Ethernet | On an RJ-45 female connector for LAN extension |
| Up to 100m (330ft) | At 4K@60Hz (4:2:0) |
| Up to 130m (430ft) | At full HD (1080p @60Hz 36bpp) |
| Up to 180m (590ft) | At HDBaseT ultra mode and full HD (1080p @60Hz 24bpp) |
| Note | When using Kramer HDBaseT cables |
| Standards Compliance | HDBaseT 1.0 |
| Max. Data Rate | 10.2Gbps (3.4Gbps per graphic channel) |
| Max. Resolution | 4K@60Hz (4:2:0) 24bpp resolution |
| HDMI Support | Deep color, x.v.Color, lip sync, HDMI uncompressed audio channels, Dolby TrueHD, DTS-HD, 2K, 4K, and 3D as specified in HDMI 2.0 |
| Indicators | IN, OUT, LINK, FEEDER and ON LED indicators |
| Controls | DIP-switches |
| Source | 48V DC, 1.36A |
| PoE | Acceptor and Provider |
| Consumption | 370mA |
| Consumption with PoE | 13Watt |
| Size | DigiTOOLS |
| Material | Aluminum |
| Cooling | Convection ventilation |
| Operating Temperature | 0 deg to 40C (32 deg to 104F) |
| Storage Temperature | -40 deg to +70C (-40 deg to 158F) |

- Power adapter
- Bracket set












