JBL PRX915 15-inch powered two-way loudspeaker
The PRX915 is the 15-inch full-range model in the PRX900 line. A 915G ferrite woofer with an FEA-designed flared port meets a 2408H-2 compression driver at 1,920 Hz, on 2,000 W peak of Class D power, for 133 dB and low end to 48 Hz at -10 dB. Coverage is 90 degrees horizontal by 50 degrees vertical.
The DSP suite is reached from an onboard colour LCD or from the JBL Pro Connect app over Bluetooth: 12-band parametric EQ, dbx DriveRack Automatic Feedback Suppression, a soft system limiter with a Soundcraft Overeasy option, and 180 ms of speaker delay in 100-microsecond steps. One app session controls up to ten cabinets and lines the PRX900 up with EON700, PRX ONE and EON ONE MK2 systems. The port geometry is modelled to cut air noise at high excursion, and the cabinet takes six M10 points or a pole.
| Type | 15-inch powered two-way loudspeaker |
|---|---|
| Amplifier power | 2000 W peak / 1000 W RMS, Class D |
| Maximum SPL | 133 dB |
| Frequency range (-10 dB) | 48 Hz - 19 kHz (4 pi) |
| Frequency range (-3 dB) | 60 Hz - 16 kHz (4 pi) |
| Coverage pattern | 90 x 50 degrees |
| Transducers | 915G 15-inch ferrite woofer; JBL 2408H-2 1.5-inch compression driver |
| Crossover frequency | 1920 Hz |
| Inputs / outputs | 2 combo inputs, 3.5 mm stereo jack; 2 XLR thru-outs, 1 mix out |
| Cooling | Natural convection, no fan |
| Mounting | 6 x M10 suspension points and pole mount |
| Dimensions (H x W x D) | 717 x 465 x 383 mm (28.2 x 18.3 x 15.1 in) |
| Net weight | 24.1 kg (53.1 lb) |










