EAW MW15 MicroWedge 15 inch Coaxial Stage Monitor
The MW15 is the largest of the EAW MicroWedge floor monitors. Its 15-inch vented cone driver is coaxial with a horn-loaded compression driver on a 1.4-inch exit and a 3-inch voice coil, so the whole cabinet behaves as a single acoustic source and the performer hears the same balance whether they are standing over it or a step to the side. Coverage is 90 degrees horizontally and vertically, and maximum SPL is 140 dB.
It can run single-amped with a passive crossover or bi-amped with external DSP handling the two-way filters and high-pass, which is how most touring rigs deploy it. Connections are NL4 input with a loop through for daisy-chaining a monitor line. The cabinet is 14.1 inches tall by 20.37 wide by 24.17 deep and weighs 72.5 pounds, and accessories include the Microleg 4-inch riser and a pole adapter for use as a small front-of-house box.
| Frequency Response | 62 Hz - 20 kHz |
|---|---|
| Max SPL | 140 dB |
| LF Subsystem | 15 inch cone, vented, coaxial with HF |
| HF Subsystem | 1 x 1.4 inch exit, 3 inch voice coil compression driver, horn loaded |
| Nominal Beamwidth | 90 degrees horizontal x 90 degrees vertical |
| Power Handling | LF 1000 W at 8 ohms, HF 150 W at 8 ohms, full range 1000 W at 8 ohms |
| Operating Mode | Single-amp LF/HF or bi-amp LF, HF with external DSP two-way filters |
| Dimensions / Weight | 14.1 x 20.37 x 24.17 in (357.4 x 517.4 x 614 mm) / 72.5 lb (32.9 kg) |








