dbx RTA-M Real Time Analyzer Microphone
The RTA-M is the optional measurement microphone built for a dbx DriveRack's real-time analysis and auto-EQ functions, giving the processor a consistent, known reference to tune a room against instead of guessing at the acoustic response. Its back electret condenser element runs omnidirectional across the full audio band.
Sensitivity is rated at -63 dB plus or minus 3 dB, and it draws standard 9 to 52 volt phantom power from the DriveRack or any other console input, so no separate power supply is needed. The mic head is 10 mm across on a 145 mm body, small enough to place unobtrusively for a listening-position measurement.
- Dimensions10 mm (mic head) x 145 mm (L)
- Polar PatternOmnidirectional
- Frequency Range20 Hz - 20,000 Hz
- Sensitivity-63 dB +/- 3 dB
- Power9 - 52 V DC phantom power
| Element | Back electret |
|---|---|
| Polar Pattern | Omnidirectional |
| Frequency Range | 20 Hz - 20,000 Hz |
| Impedance | 250 Ohms +/- 30% at 1 kHz |
| Sensitivity | -63 dB +/- 3 dB |
| Power | 9 - 52 V DC |
| Dimensions | 10 mm (mic head) x 145 mm (L) |









