Chauvet DJ Geyser Move Lit Fog Burst
Geyser Move takes the classic vertical fog-burst effect and adds a motorized nozzle that sweeps the plume through 45 degrees of tilt, so the burst arcs across the stage instead of shooting straight up in one column every time. Two penta-color LED zones (RGBA+UV) light the fog from inside the nozzle, turning what is usually a plain white burst into a colored geyser that syncs to the rest of the lighting rig.
Output is 17,000 cfm at 62.5 ml of fluid per minute, with a 5-minute heat-up and a 0.6-gallon tank sized for a compact fixture rather than an all-night fogger. Control is 16-channel DMX over 3-pin or 5-pin XLR, or the included wireless remote for a stand-alone hit. It runs on Chauvet's QDF and QDF5 fog fluids, and the digital display makes dialing in burst timing straightforward without a controller.
| Fog Output | 17,000 cfm; 62.5 ml/min fluid consumption |
|---|---|
| Tank Capacity | 0.6 gal (2.4 L) |
| Movement | Motorized nozzle, 45° tilt sweep; 57° beam angle |
| Light Source | 2 zones RGBA+UV LEDs |
| DMX Channels | 16; 3-pin and 5-pin XLR |
| Control | DMX or included wireless remote; built-in digital display |
| Heat-Up Time | 5 minutes |
| Power / Weight | 1240 W, 11 A @ 120 V, 60 Hz; 24.6 lb (11.1 kg) |









