Audix logo
Shop all Audix

Audix AP42BP Dual-Channel Wireless Bodypack System

The Audix AP42BP is a Performance Series analog UHF wireless system built around the B60 bodypack transmitter. The AP42 puts two independent channels in one rack space. The R42 is a dual-channel antenna-diversity receiver covering a 32 MHz window with 106 pre-coordinated frequencies, and up to 8 systems can operate together. Auto scan and infrared sync set each channel up in seconds.

The B60 takes any lavalier, headworn, or instrument microphone in the Audix line on its 3-pin mini-XLR input, and it will take a guitar or bass just as happily. Gain is switchable at 0, -6, -12 and -24 dB so a hot instrument pickup and a quiet lavalier can both sit correctly.

ReceiverR42 dual-channel, single tuner antenna diversity
Frequency RangeA: 522 MHz - 554 MHz / B: 554 MHz - 586 MHz
Switchable Frequencies106 pre-coordinated frequencies
Simultaneous SystemsUp to 8
Audio Frequency Response45 Hz - 18 kHz
Signal-to-Noise Ratio105 dB at 30 kHz deviation (A-weighted)
Output ConnectorsXLR balanced and 1/4 in unbalanced
TransmitterB60 bodypack, 3-pin mini-XLR input, 10 mW / 30 mW RF
Transmitter Battery2 x AA, approximately 14 hours
Audix Performance Series Wireless: the AP41 and AP42 Systems
Audix AP41/AP42 Performance Series Wireless Overview