Teradek Bolt 6 XT MAX Set with 10K RX
This is the top of Teradek's Bolt 6 line: a XT MAX transmitter paired with the directional 10K receiver, rated for a visually lossless picture out to 10,000 feet (3 km) of line of sight - roughly double the standard MAX set's 5,000 foot range. Both halves carry up to DCI 4K60 at 10-bit 4:2:2 HDR over 12G-SDI with less than 0.001 seconds of delay, and the receiver's integrated directional panel antenna with internal RF shielding is what holds the link at distances where a standard omnidirectional Bolt receiver would drop out - the reason productions spec this set for hillside video villages, stadium suites, and helicopter downlink stations rather than the standard MAX kit.
The receiver outputs 2x 12G-SDI plus HDMI so it can feed a switcher and a monitor at once, and both units are AES-256 encrypted with RSA-1024 key pairing over the 5 GHz and 6 GHz bands. In the box: the transmitter with its mount plate, the 10K receiver with mount plate and yoke, cables, antennas, and a case. It ships in Gold Mount (rated for 14V and 26V batteries) or V-Mount; the 10K receiver is also sold on its own for pairing with an existing Bolt 6 or Bolt 4K transmitter, and a shorter-range (5,000 ft) MAX set with a standard receiver is already on the site (linked above) at a lower price point.
| Video I/O | 12G-SDI (TX in / loop out; RX 2x out) and HDMI |
|---|---|
| Maximum Resolution | DCI 4K60, 10-bit 4:2:2 HDR |
| Latency | Less than 0.001 seconds |
| Range | Up to 10,000 ft (3 km) line of sight |
| Frequency Bands | 5 GHz and 6 GHz |
| Encryption | AES-256 with RSA-1024 key pairing |
| Receiver Antenna | Integrated directional panel antenna, internal RF shielding |
| Mount Options | Gold Mount (14/26V) or V-Mount |
| Included | TX with mount plate, 10K RX with mount plate and yoke, cables, antennas, case |














