Rode VideoMic Me Directional Microphone for Smartphones
The VideoMic Me is a small directional microphone for phones and tablets that still have a 3.5mm headphone jack. Its cardioid pickup favours what the camera is pointed at and turns down the room around it, so speech in a video stays clear when the phone is held at arm's length.
A 3.5mm headphone output on the mic itself lets you listen while recording and play back without unplugging. It comes with a mounting clip that holds it on the device and a WS9 furry windshield for outdoor shooting. It weighs 34 g and measures 80 x 38 x 21 mm.
- Output Connection3.5mm TRRS
- Polar PatternCardioid
- Frequency Range100 Hz - 20 kHz
- Sensitivity-33.0 dB re 1 V/Pa (22.00 mV @ 94 dB SPL) +/- 2 dB @ 1 kHz
- Weight34 g
| Acoustic Principle | Pressure gradient electret |
|---|---|
| Active Electronics | JFET impedance converter |
| Capsule | 0.50 in |
| Polar Pattern | |
| Frequency Range | 100 Hz - 20 kHz |
| Maximum SPL | 140 dB SPL |
| Sensitivity | -33.0 dB re 1 V/Pa (22.00 mV @ 94 dB SPL) +/- 2 dB @ 1 kHz |
| Equivalent Noise Level | 20 dBA |
| Output Connection | 3.5mm TRRS |
| Weight | 34 g |
| In the Box | VideoMic Me, WS9 windshield, mounting clip |









