Shop all OConnor
OConnor Pan Handle
OConnor bends its pan handles 30 degrees rather than running them straight, which puts the grip where an operator's wrist naturally sits when the head is level and keeps it usable through a full tilt. All three of these share that bend and differ in length, diameter and which head range they thread into.
1030-246 is the 12 in (30 cm) handle for the 1030 and 1040 range at 0.7 in (18 mm) diameter. 2575-137 is the same 12 in length and 0.7 in diameter for the 2065, 2575 and 120EX ranges. 2575-107 is the large handle for those same larger heads: 16.5 in (42 cm) long and 1 in (2.54 cm) in diameter, which is the one to choose when the operator is working a long lens and wants more leverage in the hand. Each takes a matching extension.
| Type | Fluid head pan handle, 30 degree bend |
|---|---|
| 1030-246 | For 1030 and 1040 range, 12 in (30 cm), 0.7 in (18 mm) diameter |
| 2575-137 | For 2065, 2575 and 120EX ranges, 12 in (30 cm), 0.7 in (18 mm) diameter |
| 2575-107 | Large, for 2065, 2575 and 120EX, 16.5 in (42 cm), 1 in (2.54 cm) diameter |
| Matching Extensions | 2575-135 for 1030-246 and 2575-137; 2575-105 for 2575-107 |
| Supplied In | 1030-246 ships in the Ultimate 1040 package; 2575-137 in the 2560, 2575D and 2575E packages |
