Chauvet DJ D-Fi Hub 2
D-Fi Hub 2 puts a D-Fi transmitter and receiver in a single small unit instead of separate TX and RX modules, so one box can either send DMX out wirelessly to a room full of D-Fi-ready fixtures or pick up a wireless feed and hand it back to a wired console. It integrates with Chauvet's ILS Command system for shows that mix wireless and DMX-controlled gear on the same cue.
USB-C passthrough power keeps a phone or tablet charged from the same unit running the lighting link, and mounting is simple: fastening straps or M10 threaded holes fix it to truss or a stand. Range reaches 656 feet unobstructed, well past what a single-room event needs.
| Function | Combined D-Fi transmitter/receiver |
|---|---|
| DMX Connector | 3-pin XLR |
| Operating Frequency | 2.412 to 2.484 GHz |
| Max Range | 656 ft (200 m) unobstructed |
| Input Voltage | 5 VDC, 2 A (ext. supply 100-240 VAC, 50/60 Hz) |
| Weight / Size | 0.2 lb (0.1 kg); 3.9 x 3 x 1.6 in |
| Mounting | Fastening straps or M10 threaded holes |
| Included | Power cord, power supply, quick reference guide |











