Biamp logo
Shop All Biamp

Biamp Impera Tango Touch Panel Controller

The Impera Tango is Biamp's central control processor for presentation rooms, classrooms and conference spaces. It runs up to five Apprimo touch panels from one unit, and its interface is laid out in Biamp's Project Designer software, so each room gets controls that match how it is actually used.

For third-party gear it offers three bidirectional RS-232 or six IR ports, plus two unidirectional RS-232 or four more IR ports, four relays and eight GPIO for screens, lifts, sensors and switches. It is powered over Ethernet (802.3af Class 3), measures 1.4 x 8.7 x 2.8 in., and carries a 5-year warranty.

  • Dimensions (H x W x D)1.4 x 8.7 x 2.8 in.
  • PowerPoE, IEEE 802.3af Class 3, 15 W; 12 W max output
  • Weight1.1 lbs
  • Touch Panels SupportedUp to 5 Apprimo touch panels
  • RS-232 / IR3 bidirectional RS-232 or 6 IR
Part Number910-01880
Touch Panels SupportedUp to 5 Apprimo touch panels
RS-232 / IR3 bidirectional RS-232 or 6 IR; 2 unidirectional RS-232 or 4 IR; 1200-115200 bit/s; IR 400 Hz to 500 kHz
Relays4, 2-pin 0.3 in. Euroblock, 30 VDC / 0.5 A
GPIO8, 5-pin 0.3 in. Euroblock, open drain, max 24 VDC / 0.5 A
NetworkRJ-45, 10/100 Mbps, CAT5e or better
Power, IEEE 802.3af Class 3, 15 W; 12 W max output
Dimensions (H x W x D)1.4 x 8.7 x 2.8 in. (35 x 220 x 70 mm)
Weight1.1 lbs (0.5 kg)
Operating Temperature32-86 F (0-30 C)
CertificationsFCC Part 15B, UL listed, CE marked, RoHS
Warranty5 years
ISE 2025: Biamp Impera Tango Control Unit, with Legacy IR Support (rAVe)
InfoComm 2025: Biamp Impera Tango Controller for Room Touch Panels (rAVe)
4items in the box
  • 11 x terminal connector
  • 2 x wall-mount screw and 2 x drywall anchor (4 x 60 mm)
  • 2 x rack-shelf mounting screw (M4 x 35 mm)
  • 4 x adhesive foot