American DJ Aggressor Hex LED Sound-Active Beam Effect

The Aggressor Hex LED is the sound-active beam effect ADJ has kept in the line for years, rebuilt around Hex LED emitters. Each of the two 12 W sources packs red, green, blue, cyan, amber and white into a single diode, so the 60 beams it fans across a room reach colors a plain RGB fixture cannot mix.

There is nothing to program. Plug it in, and the built-in sound trigger drives the beam movement off the music. IEC connectors on the rear daisy-chain power to the next fixture, up to 10 units on a 120 V circuit or 15 on 230 V, and the unit runs on anything from 100 to 240 V at 30 W. The LEDs are rated at roughly 50,000 hours.

Light Source	Two 12 W 6-in-1 RGBCAW Hex LEDs
Effect	60 sound-activated beams
Control	Sound active, plug and play, no external controller required
Power Consumption	30 W max per unit
LED Life	Rated at approximately 50,000 hours
Power Input	AC 100 - 240 V, 50/60 Hz
Power Linking	IEC AC in/out, up to 10 units at 120 V, 15 units at 230 V
Dimensions (LxWxH)	13 x 12.5 x 12.5 in / 330 x 316 x 313 mm
Weight	10 lbs / 4.2 kg