Aida Imaging UHD-NDI3-IP67 Weatherproof 4K UHD NDI|HX3 POV Camera
The UHD-NDI3-IP67 takes Aida's 4K NDI|HX3 camera outdoors. It uses the same 4K Sony CMOS sensor as the indoor model, streaming 2160p60 over NDI|HX or downscaling to 1080p60 for NDI|HX3, where the stream runs at up to 60 Mb/s. Aida calls it the first 4K IP67 NDI HX3 camera, and the point of the sensor is that downscaled Full-HD off a 4K chip holds up better than the same resolution off a native HD sensor. The 5mm CS-mount lens covers a 72-degree horizontal field of view.
A rubber-sealed weatherproof cap protects the front element and still allows a lens change, though focal length and size limit which lenses fit. A 10-foot weatherproof cable carries the connections out of the housing, and the ends need to be wrapped or enclosed once installed. HX3 or HX, SRT, RTSP, and RTMP run simultaneously, so the camera can feed an NDI switcher and push straight to a streaming platform at the same time. Control is over VISCA on IP or the built-in web UI, PoE+ handles power and data on one cable, and 1/4"-20 threads top and bottom suit pole or bracket mounts.
| Sensor | 4K Sony CMOS |
|---|---|
| Lens | 5mm CS mount, 72-degree horizontal FOV, sealed weatherproof cap |
| Weatherproofing | IP67 rated |
| Resolution | 2160p, 1080p, 1080i, 720p |
| Frame Rate | 2160p60 over NDI|HX; 1080p60 over NDI|HX3 |
| Outputs | NDI|HX3 or HX, SRT, RTSP and RTMP, simultaneous |
| Cabling | 10 ft weatherproof cable; PoE+ capable |
| Control / Mounting | VISCA over IP and web UI; 1/4"-20 thread top and bottom |











