Shop All Adder
Adder CATX-DP-USBA Computer Access Module, DisplayPort, USB and Audio to RJ45, 300m
The CATX-DP-USBA connects to the DisplayPort video output plus USB and audio ports of a computer and runs over CAT 5, 5e or 6 cable to ADDERView CATx KVM switches or ADDERLink X100 or X200 receivers. It reaches 1920 x 1200 x 60Hz at 200m and 1280 x 1024 x 60Hz at 300m.
Power comes from the computer's USB port (up to 500mA), not from the video connector. At power-up the module reads the EDID from the switch or extender attached to the monitor and passes it to the computer. USB is limited to low speed HID devices.
- Maximum video resolution1920 x 1200
- PowerUSB powered, max 500mA @ 5V
- OS compatibilityOperating system independent
- USBLow speed (1Mb/s) HID USB devices only
- Audio2 channel CD quality via 3.5mm jack plug
| Part number | CATX-DP-USBA |
|---|---|
| Connectors | 1 x Display Port; 1 x USB Type A plug; 1 x 3.5mm jack plug; 1 x RJ45 |
| Maximum video resolution | 1920 x 1200 |
| Extension distance | 1920 x 1200 x 60Hz at 200m; 1280 x 1024 x 60Hz at 300m |
| USB | Low speed (1Mb/s) HID USB devices only |
| Audio | 2 channel CD quality via 3.5mm jack plug; no audio through the DisplayPort connector |
| OS compatibility | Operating system independent |
| Physical | Hi impact resistance ABS, 45mm / 1.75in (w) x 75mm / 3in (d) x 25mm / 1in (h), 300mm / 12in flying leads, 100g / 0.2 lb |
| Power | USB powered, max 500mA @ 5V |
| Operating temperature | 0 to 40C / 32 to 104F |
| Approvals | CE, FCC |









