AdderLink DV120 DVI over CATx Receiver (Remote Unit)
This is the receiver (remote unit) only; pair it with an ALDV120T transmitter. The AdderLink DV120 extends DVI-D digital video up to 50 m over a single CATx cable, so the playback hardware can stay in a secure, temperature-controlled room while the display shows exactly what the local monitor shows. Video is uncompressed, with zero data loss at resolutions up to 1920 x 1200 at 60Hz.
The local unit draws power from a standard USB socket and sends low-voltage power to the remote unit down the same cable, so neither end needs an external power supply. EDID is read from the display and passed back to the computer, and the units arrive in a zero-config state with no drivers or software.
- Dimensions45 x 63 x 21 mm (1.8 x 2.5 x 0.8 in) with 30 cm pigtails
- Transmitter connectionsDVI-D male, USB type A (power only)
- Receiver connectionsDVI-D male
- Maximum resolution1920 x 1200 at 60Hz (WUXGA, reduced blanking), 24-bit color
- PowerUSB powered, 5VDC 2.5W for both RX and TX units combined
| Part number | ALDV120R |
|---|---|
| Maximum resolution | 1920 x 1200 at 60Hz (WUXGA, reduced blanking), 24-bit color |
| Extension distance | Up to 50 m over a single CATx cable (CAT7 or shielded CAT6a, no patch connections); 40 m with 2 patch connections |
| Transmitter connections | DVI-D male, USB type A (power only) |
| Receiver connections | DVI-D male |
| Power | USB powered, 5VDC 2.5W for both RX and TX units combined |
| Dimensions | 45 x 63 x 21 mm (1.8 x 2.5 x 0.8 in) with 30 cm pigtails |
| Weight | 250 g / 0.6 lb per pair |
| Enclosure | Injection molded ABS |
| Operating temperature | 0 to 40 °C / 32 to 104 °F |
| Approvals | CE, FCC |









