Adder CATX-MDP-USBA Computer Access Module, Mini DisplayPort, USB and Audio to RJ45, 300m
The CATX-MDP-USBA connects to the Mini DisplayPort video output plus USB and audio ports of a computer and runs over CAT 5, 5e or 6 cable to ADDERView CATx KVM switches or ADDERLink X100 or X200 receivers. It reaches 1920 x 1200 x 60Hz at 200m and 1280 x 1024 x 60Hz at 300m.
Power comes from the computer's USB port (up to 500mA), not from the video connector. At power-up the module reads the EDID from the switch or extender attached to the monitor and passes it to the computer. USB is limited to low speed HID devices. The Mini DisplayPort version suits computers and graphics cards with mini DisplayPort outputs.
- Maximum video resolution1920 x 1200
- PowerUSB powered, max 500mA @ 5V
- OS compatibilityOperating system independent
- USBLow speed (1Mb/s) HID USB devices only
- Audio2 channel CD quality via 3.5mm jack plug
| Part number | CATX-MDP-USBA |
|---|---|
| Connectors | 1 x Mini Display Port; 1 x USB Type A plug; 1 x 3.5mm jack plug; 1 x RJ45 |
| Maximum video resolution | 1920 x 1200 |
| Extension distance | 1920 x 1200 x 60Hz at 200m; 1280 x 1024 x 60Hz at 300m |
| USB | Low speed (1Mb/s) HID USB devices only |
| Audio | 2 channel CD quality via 3.5mm jack plug; no audio through the DisplayPort connector |
| OS compatibility | Operating system independent |
| Physical | Hi impact resistance ABS, 45mm / 1.75in (w) x 75mm / 3in (d) x 25mm / 1in (h), 300mm / 12in flying leads, 100g / 0.2 lb |
| Power | USB powered, max 500mA @ 5V |
| Operating temperature | 0 to 40C / 32 to 104F |
| Approvals | CE, FCC |









