Adder DDC Ghost VGA EDID/DDC Emulator
The ADDER DDC Ghost sits in a VGA line and clones a full dual-page EDID (the standard block plus the extended data block) from the attached display, then presents it to the graphics card. Some high-performance video cards will not run at high resolutions through an extender that lacks DDC support; the DDC Ghost supplies that data.
It also carries a built-in extended EDID profile for use where no display data is available. Setup is one button guided by an LED, and the unit takes power from VGA pin 9 or from an optional 5 V supply.
- Dimensions (W x D x H)68 mm/2.67 in x 36 mm/1.41 in x 21 mm/0.82 in
- PowerInline power: 5 V; external supply (optional): 5 V
- Weight56 g / 0.12 lb
- Display adapter sideStandard VGA - HDD15 (Female - Blue)
- Display device sideStandard VGA - HDD15 (Female - Black)
| Part number | DDC-GHOST |
|---|---|
| Video resolution | Limited only by your selection of display device and display adapter |
| Display adapter side | Standard VGA - HDD15 (Female - Blue) |
| Display device side | Standard VGA - HDD15 (Female - Black) |
| Case | All metal case |
| Dimensions (W x D x H) | 68 mm/2.67 in x 36 mm/1.41 in x 21 mm/0.82 in |
| Weight | 56 g / 0.12 lb |
| Power | Inline power: 5 V; external supply (optional): 5 V |
| Operating temperature | 0 to 40 °C (32 to 104 °F) |
| Approvals | CE, FCC |









