Vinten VBFT VB-FTMS
VB-FTMS is the Vinten Vision blue head on flowtech75 carbon legs with a mid-level spreader. The head is built around a problem most fluid heads duck: a small, lightly accessorised camera sits low, and its center of gravity lands around 55 mm above the plate, where a head designed for a shouldered rig cannot balance it. Vision blue's Perfect Balance counterbalance is tuned for exactly that, holding 2.1 to 5 kg through the full ±90 degree tilt without the camera falling away at the ends of the move.
Drag comes from Vinten's calibrated LF fluid system, infinitely adjustable rather than stepped, so a slow reveal and a fast whip both come from the same head. The Vision AS long-slot sliding plate takes a 1/4 in screw and pin, and a high-contrast blue LED bubble lights the level. The head weighs 2.4 kg with pan bar, plate, and bowl clamp fitted. Underneath, flowtech75 legs open from single top-mounted flip-locks at standing height and carry 20 kg. Ships as: Vision blue head (V4092-0001), flowtech75 MS tripod with mid-level spreader, carry handle (S2051-1061), and soft case flowtech75 (V4150-1850).
| Fluid Head | Vision blue (V4092-0001) |
|---|---|
| Payload | 2.1 - 5 kg (4.6 - 11 lb) |
| Centre of Gravity | Approximately 55 mm |
| Counterbalance | Perfect Balance, infinitely adjustable |
| Drag | Calibrated LF drag, infinitely adjustable, pan and tilt |
| Tilt / Pan Range | ±90° tilt, 360° pan |
| Bowl Size | 75 mm |
| Camera Plate | Vision AS two-way sliding plate, 1/4 in screw and pin |
| Head Weight | 2.4 kg (5.3 lb) with pan bar, camera plate and bowl clamp |
| Tripod | flowtech75 MS, 2-stage carbon fibre, 20 kg (44 lb) payload, mid-level spreader |
| Included | Vision blue head (V4092-0001), flowtech75 MS tripod, carry handle (S2051-1061), soft case flowtech75 (V4150-1850) |









