Vaddio RoboSHOT IW Clear Glass PTZ Camera (Primed)
The RoboSHOT IW recesses a full 10x PTZ camera into the wall behind a glass front frame, keeping a room clean while the camera stays protected and discreet. It is built on a 1/2.8-type Exmor CMOS sensor with 10x optical zoom (12x in super-wide mode) and a 73-degree wide field of view, shooting up to 1080p/60. This model uses a clear glass front that leaves the lens unobstructed, on a primed frame that can be painted to match the wall. The recessed, ADA-compliant design suits boardrooms, courtrooms and worship spaces where clean interior design or theft deterrence matters.
This configuration is the camera and enclosure only: it connects over HDBaseT to a Vaddio OneLINK HDMI or OneLINK Bridge interface (ordered separately) for power, control and video output. In the box: the RoboSHOT IW camera and back-box, a primed clear-glass front frame, left and right interior side plates, drywall fastening and mounting hardware, the Vaddio IR Remote Commander, and an installation guide.
| Image Sensor | 1/2.8-type Exmor CMOS, 2.14 megapixel effective |
|---|---|
| Zoom | 10x optical (12x in super-wide mode) |
| Horizontal FOV | 73 degrees (wide) to 6.6 degrees (tele) |
| Resolutions | Up to 1080p/60 |
| Pan / Tilt | Pan +/-31 degrees, Tilt +18 / -30 degrees |
| Camera Interface | HDBaseT to OneLINK (interface sold separately) |
| Power | Under 25W (PoE+) via OneLINK |
| Included | Camera and back-box, primed clear-glass frame, side plates, drywall hardware, IR remote, installation guide |









