Vaddio logo
Shop All Vaddio

Vaddio RoboSHOT IW Clear Glass PTZ Camera

The RoboSHOT IW is a pan/tilt/zoom camera that recesses into the wall behind a flush glass front, so the room sees a clean panel instead of a camera on an arm. A 1/2.8-type Exmor sensor and a 10x optical zoom (12x in super-wide mode) deliver 1080p/60, with a 73-degree wide field of view narrowing to 6.6 degrees at tele, and the head pans and tilts within its recess to reframe the room. This is the clear glass version, which leaves the lens visible.

This is the camera on its own, without a OneLINK interface. It connects over HDBaseT and IP streaming and takes PoE+ power, so a single category run handles the install. In the box you get the RoboSHOT IW camera and back-box, the clear glass front frame in black, interior side plates, drywall fastening and mounting hardware, the Vaddio IR Remote Commander, and the installation guide.

Sensor1/2.8-type Exmor CMOS (2.14 MP effective)
Resolution1080p/60
Zoom10x optical (12x in super-wide mode)
Horizontal Field of View73 degrees (wide) to 6.6 degrees (tele)
Pan / Tilt RangePlus/minus 31 degrees pan, +18/-30 degrees tilt
ConnectivityHDBaseT and IP streaming (H.264)
Power+ (802.3at)
Form FactorIn-wall recessed with clear glass front
IncludedRoboSHOT IW camera and back-box, clear glass front frame (black), interior side plates, drywall mounting hardware, IR Remote Commander, Installation Guide
Vaddio RoboSHOT IW PTZ Camera In-Wall Solution
How to Install the Vaddio RoboSHOT IW (In-Wall) PTZ Camera