Vaddio RoboSHOT IW Clear Glass OneLINK Bridge System

This RoboSHOT IW system uses a clear-glass front frame, which stays transparent at all times rather than frosting between sessions, and pairs the recessed in-wall PTZ camera with a OneLINK Bridge interface for USB conferencing. A 1/2.8-type Exmor CMOS sensor and a 10x optical lens deliver 1080p/60 video across a 73-degree wide view that narrows to 6.6 degrees at full zoom, with pan of plus or minus 31 degrees and tilt from plus 18 to minus 30 degrees at up to 90 degrees per second. The camera and its back-box sit behind tempered safety glass in a black frame, flush with the wall.

The OneLINK Bridge interface runs power, video, control, and audio to the camera over a single Cat cable up to 328 feet (100 m) and adds an uncompressed USB 3.0 output, so the in-wall camera can drive a PC or Mac soft-codec session such as Zoom, Teams, or Webex. The system ships as the camera and back-box, a clear-glass front frame, left and right interior side plates, drywall mounting hardware, the Vaddio IR Remote Commander, the OneLINK Bridge interface, a 48V power supply, an EZCamera RS-232 control adapter, four 3-position phoenix connectors, a 6-foot USB 3.0 cable, and an installation guide.