Vaddio Cisco Codec Kit for OneLINK HDMI to HDBaseT Cameras

This kit joins a Vaddio HDBaseT camera to a Cisco Telepresence codec through the OneLINK HDMI interface, carrying power, control, and an HDMI feed to the camera over a single category cable. It is designed for Cisco SX20, SX80, and C-Series codecs and works with the RoboSHOT 12 and 30 HDBT, RoboSHOT 20 UHD, and DocCAM 20 HDBT cameras, so an integrator can drop a Vaddio camera into an existing Cisco room without pulling a rack of separate cables.

The OneLINK interface extends the camera up to 328 ft (100 m) over Cat-5e or better, powers it at 48V, and passes RS-232 control through the included EZCamera adapters. Note that a Cisco SX20 install also needs a Cisco CAB-PHD4XS2-SPLIT cable, which is supplied by the customer. The kit ships with the OneLINK HDMI interface, a 48V power supply, category and HDMI cables, the EZCamera RS-232 control adapters, and the quick-start guide.