Turbosound PQ10 10" Two-Way Passive Loudspeaker

The PQ10 is the 10" cabinet in the Turbosound PQ line, a two-way passive box aimed at live production rather than fixed install. Ferrite motors keep the cost down where weight matters less than budget, and the pattern is fixed at 80 by 50 degrees.

The passive crossover splits a ferrite low frequency driver and a compression driver across a fixed 80 by 50 degree pattern, and the whole cabinet presents a single 8 ohm load to one amp channel. Continuous ratings are quoted separately for LF, HF and full range so a bi-amped rack can be specified against the same sheet.

Type	2-way passive full range loudspeaker
Frequency response (+/-3 dB)	80 Hz - 20 kHz
Frequency response (-10 dB)	50 Hz - 20 kHz
Nominal dispersion (-6 dB)	80 degrees H x 50 degrees V
Power handling (IEC)	LF 350 W, HF 50 W, full range 400 W continuous
Peak power	LF 1400 W, HF 200 W, full range 1600 W peak
Sensitivity (1 W @ 1 m)	96 dB
Maximum SPL (full range)	128 dB, 134 dB peak
Impedance	8 ohms
Components	1 x 10" (250 mm) ferrite LF driver
Dimensions (H x W x D)	545 x 340 x 320 mm (21.56" x 13.4" x 12.6")
Net weight	17.8 kg (39.24 lbs)