Totevision LED-1003HDL 9.7-inch Flush-Mount Monitor

The LED-1003HDL is a 9.7-inch flush-mount monitor built to disappear into a wall, console, or equipment panel and leave nothing behind but picture. The 1024 x 768 panel runs a 4:3 native aspect at 400 Nits with a 1000:1 contrast ratio, and the 89/89/89/89 viewing angle keeps the image honest from anywhere in the room. A 20ms response time plus Totevision's 3D interlace comb filter, digital noise reduction, and 4H filtering sharpen analog and digital sources alike, which makes it a sound match for the high-resolution megapixel camera feeds a lesser panel would smear.

Connections cover one HDMI input, a 15-pin D-sub VGA input, and a composite BNC input with a BNC loop output for daisy-chaining a feed downstream. Audio arrives on RCA L/R or a 3.5mm PC input and plays through two built-in speakers. The installer's cutout is 8-7/8 x 7-3/4 inches, the anti-glare metal case measures 10.8 x 9.8 x 1.85 inches, and the monitor weighs 3.3 pounds net. It runs on 12VDC at 1A, negative ground, drawing 30 watts maximum.