Teradek logo
Shop all Teradek

Teradek Ranger Mk II 2500 12G-SDI/HDMI Wireless Transmitter

This is the Ranger Mk II 2500 transmitter sold on its own - the unit to buy when a second or third camera joins a shoot that already has Ranger receivers on the other end. It takes 12G-SDI or HDMI in at up to 4K60 with HDR, passes it through an input scaler, and sends it out with under 0.001 seconds of delay. Range is 2500 ft line of sight, enough to cover a field, a parade route, or a stage-to-truck run across a venue car park.

One transmitter can feed up to six receivers at once, so video village, the DIT cart, and the director's monitor all pull from the same unit. It runs on 7-28 VDC through a 2-pin locking connector, tunes across 4.9 to 6.425 GHz including the 6 GHz U-NII-5 channels, and encrypts the link with AES-256 and RSA-1024 key pairing. Ranger generations are intercompatible, so this transmitter pairs with Ranger Mk II receivers already in the kit room.

RangeUp to 2500 ft line of sight
Video Input1x 12G-SDI (SMPTE 2082-1, 75 ohm), 1x HDMI 2.0 Type-A
RF Output Power23 dBm EIRP
Power Input2-pin locking connector, 7-28 VDC, 12W
Dimensions / Weight3.7 x 6.1 x 1.3 in; 22 oz
Antennas2x 2 dBi
Max ResolutionUp to 4K60; SDI YCbCr 4:2:2 10-bit, HDMI 4:4:4 8-bit / 4:2:2 10-bit
LatencyLess than 0.001 seconds (no format conversion)
Frequency Range4.9 - 6.425 GHz, licensed and unlicensed 5 GHz plus 6 GHz U-NII-5
EncryptionAES-256 with RSA-1024 key exchange
Receivers per TransmitterUp to 6
Operating Temperature0 to 40 C
Model10-2591-G, 10-2591-G26, 10-2591-V
Teradek Ranger: Overview