Tannoy logo
Shop All Tannoy

Tannoy 0301-AAU86-000 CMS 503DC PI Ceiling Loudspeaker

The CMS 503DC PI is a full-bandwidth ceiling loudspeaker from Tannoy's third-generation CMS 3.0 range, rated 60 W continuous and 240 W peak. Its 5-inch Dual Concentric point-source driver uses Omnimagnet technology on a Torus Ogive waveguide, which keeps coverage wide and even and speech easy to follow across the room. This Pre-Install version ships without a back can, so the can goes in first and the speaker later; its clamps reach further for thicker ceiling panels and lock to prevent over-tightening.

A self-aligning 3-way clamp system makes installation quick. A low-insertion-loss 30 W transformer with a front-panel tap switch covers 70 V and 100 V lines, or set it to 16 ohms for direct drive. Wiring lands on a removable locking screw-terminal connector with loop-through. The paintable powder-coated steel mesh grille has dust protection, two tile support rails and a C-ring come in the box, and an Arco grille that hides the whole unit and a plaster (mud) ring are optional. Finished in semi-matt white, it is optimised for LAB GRUPPEN LUCIA amplifiers, which run up to eight CMS speakers per channel.

  • Frequency Response (-3 dB)85 Hz - 50 kHz (BM backcan)
  • System Sensitivity (1 W @ 1 m)89 dB (1 W = 4 V for 16 Ohms)
  • Power Handling60 W average, 120 W programme, 240 W peak
  • Net Weight (ea)3.2 kg (7.05 lbs)
  • Coverage Angle90 degrees conical
Frequency Response (-3 dB)85 Hz - 50 kHz (BM backcan)
System Sensitivity (1 W @ 1 m)89 dB (1 W = 4 V for 16 Ohms)
Coverage Angle90 degrees conical
Power Handling60 W average, 120 W programme, 240 W peak
Nominal Impedance (Lo Z)16 Ohms
Rated Maximum SPL107 dB average, 113 dB peak
Transformer Taps 70 V30 W / 15 W / 7.5 W / 3.75 W / OFF & low impedance
Transformer Taps 100 V30 W / 15 W / 7.5 W / OFF & low impedance
Transducer1 x 130 mm (5.0 in) Dual Concentric, Omnimagnet; 20 mm (0.79 in) PEI dome HF
Hole Cutout Diameter190 mm (7.48 in)
Net Weight (ea)3.2 kg (7.05 lbs)
ComplianceUL-1480, UL-2043, CE
IncludedC-Ring, tile-bridge kit, paint mask, cut-out template, grille
Model_Code0301-AAU
FeaturesFull-range ceiling loudspeaker for installation applications; 60 Watts continuous, 240 Watts peak power; Next generation 5" Dual Concentric driver featuring Omnimagnet technology; Torus Ogive waveguide for improved high-frequency response and directivity; Pre-install version supplied without back can (available separately); UL 1480 certified for general signalling systems; UL 2043 certified for air-handling spaces; Multiple transformer taps for 70 V and 100 V line systems or 16 Ohm direct input; Low insertion loss 30 W line transformer with easily accessible tapping switch; Optimised for LAB GRUPPEN low impedance LUCIA amplifiers with up to 8 CMS series loudspeakers per channel; Semi-matte white finish fits unobtrusively in any environment; Powder-coated UV resistant perforated steel mesh grille with dust protection; Removable magnetic grille for custom painting; Optional ARCO designer grilles available for minimal architectural impact; Self-aligning 3 way clamp mounting system; Mounting C-ring and ceiling tile rails included
Mt_Sku0301-AAU86-000