Tannoy 0301-ABF86-000 CMS 803DC PI Ceiling Loudspeaker
The CMS 803DC PI is a full-bandwidth ceiling loudspeaker from Tannoy's third-generation CMS 3.0 range, rated 90 W continuous and 360 W peak. Its 8-inch Dual Concentric point-source driver uses Omnimagnet technology on a Torus Ogive waveguide, which keeps coverage wide and even and speech easy to follow across the room. This Pre-Install version ships without a back can, so the can goes in first and the speaker later; its clamps reach further for thicker ceiling panels and lock to prevent over-tightening.
A self-aligning 5-way clamp system makes installation quick. The front-panel tap switch controls a 60 W transformer housed in the optional PI back can; without it the speaker runs at 16 ohms direct. Wiring lands on a removable locking screw-terminal connector with loop-through. The paintable powder-coated steel mesh grille has dust protection, two tile support rails and a C-ring come in the box, and an Arco grille that hides the whole unit and a plaster (mud) ring are optional. Finished in semi-matt white, it is optimised for LAB GRUPPEN LUCIA amplifiers, which run up to eight CMS speakers per channel.
- Frequency Response (-3 dB)47 Hz - 30 kHz (BM backcan)
- System Sensitivity (1 W @ 1 m)92 dB (1 W = 4 V for 16 Ohms)
- Power Handling90 W average, 180 W programme, 360 W peak
- Net Weight (ea)5.0 kg (11.02 lbs)
- Coverage Angle90 degrees conical
| Frequency Response (-3 dB) | 47 Hz - 30 kHz (BM backcan) |
|---|---|
| System Sensitivity (1 W @ 1 m) | 92 dB (1 W = 4 V for 16 Ohms) |
| Coverage Angle | 90 degrees conical |
| Power Handling | 90 W average, 180 W programme, 360 W peak |
| Nominal Impedance (Lo Z) | 16 Ohms |
| Rated Maximum SPL | 112 dB average, 118 dB peak |
| Transformer Taps 70 V | 60 W / 30 W / 15 W / 7.5 W / OFF & low impedance |
| Transformer Taps 100 V | 60 W / 30 W / 15 W / OFF & low impedance |
| Transducer | 1 x 200 mm (8.0 in) Dual Concentric, Omnimagnet; 25 mm (1.00 in) PEI dome HF |
| Hole Cutout Diameter | 295 mm (11.61 in) |
| Net Weight (ea) | 5.0 kg (11.02 lbs) |
| Compliance | UL-1480, UL-2043, CE |
| Included | C-Ring, tile-bridge kit, paint mask, cut-out template, grille |
| Model_Code | 0301-ABF |
| Features | Full range ceiling loudspeaker for installation applications; 90 Watts continuous, 360 Watts peak power; Next generation 8" Dual Concentric driver featuring Omnimagnet technology; Torus Ogive waveguide for improved high frequency response and directivity; Pre-install version supplied without back can (available separately); UL 1480 certified for general signalling systems; UL 2043 certified for air-handling spaces; Multiple transformer taps for 70 V and 100 V line systems or 16 Ohm direct input when used with the optional CMS 603 PI BACKCAN; Low insertion loss 60 W line transformer with easily accessible tapping switch. Note that the transformer is mounted in the optional CMS 603 PI BACKCAN; Optimised for Lab Gruppen low impedance LUCIA amplifiers with up to 8 CMS series loudspeakers per channel; Semi matt white finish fits unobtrusively in any environment; Powder coated UV resistant perforated steel mesh grille with dust protection; Removable magnetic grille for custom painting; Optional ARCO designer grilles available for minimal architectural impact; Self-aligning 5 way clamp mounting system; Mounting C-ring and ceiling tile rails included |
| Mt_Sku | 0301-ABF86-000 |









