Tannoy logo
Shop All Tannoy

Tannoy 0301-ABE86-000 CMS 803DC BM Ceiling Loudspeaker

The CMS 803DC BM is a full-bandwidth ceiling loudspeaker from Tannoy's third-generation CMS 3.0 range, rated 90 W continuous and 360 W peak. Its 8-inch Dual Concentric point-source driver uses Omnimagnet technology on a Torus Ogive waveguide, which keeps coverage wide and even and speech easy to follow across the room. This Blind Mount version comes with an acoustically enhanced zinc-plated steel back can fitted.

A self-aligning 5-way clamp system makes installation quick. A low-insertion-loss 60 W transformer with a front-panel tap switch covers 70 V and 100 V lines, or set it to 16 ohms for direct drive. Wiring lands on a removable locking screw-terminal connector with loop-through. The paintable powder-coated steel mesh grille has dust protection, two tile support rails and a C-ring come in the box, and an Arco grille that hides the whole unit and a plaster (mud) ring are optional. Finished in semi-matt white, it is optimised for LAB GRUPPEN LUCIA amplifiers, which run up to eight CMS speakers per channel.

  • Frequency Response (-3 dB)47 Hz - 30 kHz
  • System Sensitivity (1 W @ 1 m)92 dB (1 W = 4 V for 16 Ohms)
  • Power Handling90 W average, 180 W programme, 360 W peak
  • Net Weight (ea)8.5 kg (18.74 lbs)
  • Coverage Angle90 degrees conical
Frequency Response (-3 dB)47 Hz - 30 kHz
System Sensitivity (1 W @ 1 m)92 dB (1 W = 4 V for 16 Ohms)
Coverage Angle90 degrees conical
Power Handling90 W average, 180 W programme, 360 W peak
Nominal Impedance (Lo Z)16 Ohms
Rated Maximum SPL112 dB average, 118 dB peak
Transformer Taps 70 V60 W / 30 W / 15 W / 7.5 W / OFF & low impedance
Transformer Taps 100 V60 W / 30 W / 15 W / OFF & low impedance
Transducer1 x 200 mm (8.0 in) Dual Concentric, Omnimagnet; 25 mm (1.00 in) PEI dome HF
Hole Cutout Diameter295 mm (11.61 in)
Net Weight (ea)8.5 kg (18.74 lbs)
ComplianceUL-1480, UL-2043, CE
IncludedC-Ring, tile-bridge kit, paint mask, cut-out template, grille
Model_Code0301-ABE
FeaturesFull range ceiling loudspeaker for installation applications; 90 Watts continuous, 360 Watts peak power; Next generation 8" Dual Concentric driver featuring Omnimagnet technology; Torus Ogive waveguide for improved high frequency response and directivity; Blind Mount version supplied with acoustically enhanced zinc plated steel back can; Integrated single unit construction for ease of installation; UL 1480 certified for general signalling systems; UL 2043 certified for air-handling spaces; Multiple transformer taps for 70 V and 100 V line systems or 16 Ohm direct input; Low insertion loss 60 W line transformer with easily accessible tapping switch; Optimised for LAB GRUPPEN low impedance LUCIA amplifiers with up to 8 CMS series loudspeakers per channel; Semi matt white finish fits unobtrusively in any environment; Powder coated UV resistant perforated steel mesh grille with dust protection; Removable magnetic grille for custom painting; Optional ARCO designer grilles available for minimal architectural impact; Self-aligning 5 way clamp mounting system; Mounting C-ring and ceiling tile rails included
Mt_Sku0301-ABE86-000