Sennheiser logo
Shop All Sennheiser

Sennheiser HSP 4-Ew Headworn Microphone

The HSP 4-ew is a lightweight headworn microphone that puts a cardioid condenser element right at the corner of the mouth, so the wearer's hands stay free and the level stays constant no matter how they move. The permanently polarized MKE platinum capsule delivers the clear, natural speech Sennheiser built its reputation on, and the cardioid pattern rejects sound from the sides and rear to hold off feedback on a live stage, in a lecture hall, or in a house of worship.

This is the same microphone as the HSP 4 but terminated with the ew (Evolution Wireless) connector, so it plugs straight into a Sennheiser evolution bodypack transmitter. The adjustable neckband is slim and stays put through active presenting and performing, and the mic is finished in black.

  • Connector3.5 mm jack plug
  • Frequency response40 to 20.000 Hz ± 3 dB
  • Pick-up patterncardioid
  • Sensitivity4 mV/Pa ± 3 dB
  • Temperature range-10 °C to 50 °C (14 °F to 122 °F)
Frequency response40 to 20.000 Hz ± 3 dB
Pick-up pattern
Nominal impedance @ 1 kHz1 kΩ
Min. terminating impedance4,7 kΩ
Sensitivity4 mV/Pa ± 3 dB
Diameter of mic capsule8,4 mm
Max. sound pressure level150 dB
Equivalent noise level37 dB(A)
Supply currentca. 250 μA
Power supply4,5 to 15 V
Temperature range-10 °C to 50 °C (14 °F to 122 °F)
Relative air humiditymax. 95 %
Cable length1,6 m
Diameter of boom arm2 mm
Connector3.5 mm jack plug
Weightca. 9,2 g

Manufacturer spec sheet (PDF)

Sennheiser HSP 4 Headworn Microphone Unboxing
9items in the box
  • HSP 4 Headworn microphone
  • Neckband
  • 5 x Clips for attaching the microphone boom
  • Silicone Tube
  • Connection cable
  • MZW 4 Windscreen
  • Plastic transport case, foam-lined with cut-outs
  • 2 x Caps for altering the frequency response
  • Instruction Manual