Quasar Science Ossium Frame with Twelve 2ft Rainbow 2 Tubes
An Ossium Frame Array is what you rig when a scene needs a wall of light rather than a fixture. Twelve 2-foot Rainbow 2 tubes bolt onto the frame's integrated Ossium Rail, stacking into 120 individually addressable pixels behind one aperture, and the frame carries its own yoke with a Junior pin so the whole assembly hangs from standard grip hardware. A 12-bank TRUE1 multibank adaptor ships with it, so the array powers up from a single mains feed.
Because every pixel takes its own data, the array renders image-based lighting at scale rather than just dimming as a block, and Quasar's VRGB profiles let it sync with a virtual production volume wall. Control connects directly over DMX, Art-Net, sACN, CRMX, Bluetooth or WiFi with no data box in the run. Individual tubes lift out of the rail when you need light somewhere else, which is the practical difference between this and a fixed panel. Quasar warrants the lights three years and the accessories two.
| Configuration | Twelve 2 ft Rainbow 2 tubes on a 2 ft Ossium Frame |
|---|---|
| Pixels | 120 individually addressable (10 per tube) |
| Wattage | 25 W per tube |
| CCT Range | 1,750K - 10,000K, TM-30 Rf 93 - 94 |
| Output (per tube) | 1266 lumens; 42.3 lux / 4.06 fc at 10 ft, 5600K |
| Power | TRUE1 AC 120 - 240 V; 12-bank multibank adaptor included |
| Control | DMX, Art-Net, sACN wired; CRMX, Bluetooth, WiFi wireless |
| Rigging | Frame yoke with Junior pin; tubes on integrated Ossium Rail |
| Included | 12x Rainbow 2 2ft, 1x 2ft Ossium Frame, 1x 12-bank multibank power adaptor |
| Warranty | 3 years lights, 2 years accessories |
