Kramer VP-771 9-Input ProScale Presentation Switcher/Scaler with Speaker Outputs
The VP-771 takes whichever of nine signal types a presentation room throws at it - component video, DisplayPort, 3G HD-SDI, two computer graphics, two composite video or two HDMI feeds - and scales all of them out through one HDMI, one computer graphics, one 3G HD-SDI and one DGKat twisted-pair output at once, with the audio embedded. Kramer's PixPerfect scaling and 3:2/2:2 pull-down deinterlacing keep the picture clean whether the source is a laptop or an old composite camera, and Fade-Thru-Black switching means the display never glitches on a source change - the output fades to black and the next input fades in. K-IIT XL picture-in-picture lets an operator drop a second source into or beside the main image with full sizing and positioning control, useful for a presenter running slides next to a document camera or a live feed.
A 2x10W stereo amplifier drives speakers directly, so the box can be the entire audio path for a modest presentation room; a dedicated mic input with talkover and delay handles a lectern microphone. Control runs from the front panel, an included IR remote, RS-232 or Ethernet, and settings persist in non-volatile memory across a power cycle. DGKat lets the scaled output travel over twisted-pair Cat cable to a remote display - up to 90m at 1080i or 70-90m at 1080p depending on cable grade - so the switcher itself doesn't need to sit next to the display.
| Inputs | 2 ; 2 VGA (15-pin HD); 1 component video (3x RCA); 2 composite video (RCA); 1 DisplayPort; 1 SD/HD/3G HD- (BNC, with loop); 1 mic (3.5mm) |
|---|---|
| Outputs | 1 VGA (15-pin HD); 1 SD/HD/3G HD-SDI (BNC); 1 HDMI (deep color); 1 DGKat (RJ-45); 1 S/PDIF; 2x10W speaker amplifier (terminal block) |
| Output Resolutions | Up to 2048x1080 and 1080p60 |
| Content Protection | HDCP compliant; DisplayPort 1.1a |
| Features | K-IIT XL picture-in-picture; Fade-Thru-Black switching; 3D comb filtering; built-in time base corrector |
| Controls | Front panel buttons, OSD, IR remote (included), RS-232 (9-pin D-sub), Ethernet, contact closure |
| Power | 100-240V AC, 56VA max |
| Enclosure | 19" x 9.34 x 1U (43.6 x 23.7 x 4.4cm) |
| Included | Power cord, rack ears, IR remote control |






