IDX P-V257 V-Mount Adapter Plate with Switchable 5V/7.3V Output

The P-V257 puts a V-mount on gear that never shipped with one, and regulates the pack down to the low voltage that gear expects. A switch selects 5 V or 7.3 V on the regulated side, which covers most small recorders, receivers and converters without an inline converter box.

Alongside the regulated output sit a through-out at battery voltage and two D-Tap connectors, so a light or a monitor can run at the same time. Digi-View reports the pack remaining capacity to a compatible camera viewfinder, and three screw-hole positions let the plate line up with almost any host chassis.