FBT logo
Shop All FBT

FBT JMAXX 110A Active Point Source 10 Inch

The JMAXX 110A is FBT's powered 10-inch two-way speaker for bands, DJs, presenters and small installs that need one box to work on a pole, on the floor or on a wall. A custom 10-inch woofer with a 2-inch voice coil and a 1-inch compression driver on a 90 x 60 degree constant-directivity horn give clear mids and controlled bass from 58 Hz to 20 kHz, and the built-in Class D amplifier puts 700 W RMS on the low end and 200 W RMS on the highs, for up to 129.5 dB peak.

Four EQ presets set it up for the job at hand. The polypropylene cabinet keeps it to 11.5 kg (25.3 lb), with integrated handles, M10 rigging points and a 35 mm pole socket, and a combo XLR/jack input takes a mic or line feed. A 5 m power cord comes with it.

  • Net dimensions (W x H x D)320 x 550 x 275 mm / 12.6 x 21.6 x 10.8 in
  • Input connectorXLR - Jack
  • Input impedance22 kOhm
  • Frequency response58Hz - 20kHz -6dB
  • Low frequency woofer10 in - 2 in coil
Code42604
Configuration2-way active bass reflex
Built-in amplifier LF/HF700 / 200W RMS, Class D
Frequency response58Hz - 20kHz -6dB
Low frequency woofer10 in - 2 in coil
High Frequency driver1 in compression driver
Maximum SPL cont/peak123.5 / 129.5dB
Dispersion90 deg x 60 deg H x V
EQ Presets4
Input connector - Jack
Input impedance22 kOhm
CabinetPolypropylene with integrated handles, M10 rigging points and 35 mm pole mount
Power cord5 m / 16.4 ft
Net dimensions (W x H x D)320 x 550 x 275 mm / 12.6 x 21.6 x 10.8 in
Net weight11.5 kg / 25.3 lb
InfoComm 2019: FBT JMaxX 110 and 114 with DSP and On-Board Amp
2items in the box
  • JMAXX 110A speaker
  • 5 m power cord