Deity SPD-HRISO Ground-Isolated 4-Pin Power Converter

Hum, hiss and whine in a sound bag are usually a ground loop between the distro and one powered device, not a bad cable. The SPD-HRISO sits inline on a 4-pin push-pull (Hirose-compatible) power run and isolates that ground, removing the loop without rewiring the bag or floating a signal ground where it should not be floated.

It passes a regulated 12 V output and uses the same 4-pin push-pull connector at both ends, so it drops into an existing run. Deity lists compatibility across the gear this problem actually shows up on: Audio Root eSmart BG-DU and BG-DU-REG, vmDBOX-HRS, the Sound Devices MX-HIROSE DC input sled, the 633, 664 and 688, the A10-RX A-TA3 and A-XLR adapters, the Wisycom MCR54 end plate, Zaxcom Nova, Nova 2 and Deva 24, and the Zoom F4, F8, F8n and F8n Pro.