dbx DI4 4-Channel Direct Box
The DI4 puts four independent direct boxes in a single chassis, so a keyboard rig, a multi-output laptop interface, or a small backline can all run to the snake from one unit instead of four separate DIs. Each channel accepts a 1/4 inch unbalanced source at up to 320 kOhm of input impedance and delivers a balanced XLR output at up to +16 dBu.
A stereo line mixer output on RCA connectors sums the four channels for a monitor feed, and a front panel 1/4 inch headphone jack lets an engineer check signal before it hits the snake. THD+noise measures a very low 0.0008 percent typical at +4 dBu, and the unit draws 775 mW from a universal 100-120/200-240 VAC supply.
| Channels | 4, independent |
|---|---|
| Input Connectors | 1/4 in TS, unbalanced, 320 kOhm |
| Peak Input Level | +15 dBu |
| XLR Outputs | Balanced, 600 Ohm, up to +16 dBu |
| Stereo Line Mixer Output | RCA connectors |
| Headphone Output | 1/4 in jack |
| THD + Noise | 0.0008% typical at +4 dBu, 1 kHz |
| Dimensions / Weight | 1.75 in H x 8 in W x 8.5 in D; approx. 3.85 lbs |







