Crown logo
Shop all Crown

Crown I-Tech 4x3500HD Touring Amplifier

The I-Tech 4x3500HD is Crown's touring amplifier, rated 4000 W per channel at 4 ohms and built around the BSS OMNIDRIVEHD processing engine with IIR and linear-phase FIR filters plus LevelMAX limiters. It is the box that goes under a line array and gets asked to run at level for a full show without stepping back.

The fan reports true tachometer feedback, so a fault is detected rather than discovered when the amp shuts down, and Sweep Load Monitoring gives system-level diagnostics on the loudspeakers hanging off it. Crown holds five patents across the design, three of them on the power supply alone.

Rated Power Output (per channel, 4 ohms)4000 W
Channels4 inputs, 4 outputs (Analog, AES 3, VDrive, CobraNet)
SensitivityAdjustable in 0.1dB increments from 1.28Vrms to 8Vrms
Damping Factor>5000
Signal to Noise Ratio≥108dB
THD (full rated power, 20 Hz - 20 kHz)0.35%
Dimension (HxWxD)89mm x 483mm x 431mm / 3.5in x 19in x 16.9in
Net Weight13.2kg (29lbs)
Crown I-Tech 4X3500HD Amplifier Introduction
Crown I-Tech 4X3500HD Amplifier Screen Demonstration