Crown logo
Shop all Crown

Crown I-Tech 12000HD Touring Amplifier

The I-Tech 12000HD is Crown's touring amplifier, rated 4500 W per channel at 4 ohms and built around the BSS OMNIDRIVEHD processing engine with IIR and linear-phase FIR filters plus LevelMAX limiters. It is the box that goes under a line array and gets asked to run at level for a full show without stepping back.

The fan reports true tachometer feedback, so a fault is detected rather than discovered when the amp shuts down, and Sweep Load Monitoring gives system-level diagnostics on the loudspeakers hanging off it. Crown holds five patents across the design, three of them on the power supply alone.

Rated Power Output (per channel, 4 ohms)4500 W
Channels2
Sensitivity1.4Vrms to 7.75Vrms
Signal to Noise Ratio>112dB
THD<0.1%
Intermodulation Distortion<0.2%
Dimension (HxWxD)89mm x 483mm x 411mm / 3.5in x 19in x 16.2in
Net Weight12.7kg (28lbs)
Crown I-Tech HD: LevelMAX Walk Through