Chief PWR2000B Large Flat Panel Swing Arm Wall Mount, 25 in (without interface)
The same PWR-series swing arm as the PWRUB, supplied without an interface bracket so the installer can pair it with the exact PSB custom or universal interface the display calls for. That is the specification a systems integrator usually wants: one arm, the right plate.
It extends 24.88 inches from the wall and folds back low-profile with a positive latch in the home position. Swivel reaches up to 90 degrees left or right depending on screen size, Centris tilt covers +5 to -15 degrees by fingertip, and 6 inches of integrated lateral shift each way lets you centre the screen after the plate is on the studs. Q-Latch secures the panel, CableTrac routes the cable along the arm, and mounting guides are included. Built for 16 inch on-centre wood studs. Depth and extension exclude the interface bracket, which adds 0.5 to 1.5 inches.
| Display size | 32 - 65 in (813 - 1651 mm) |
|---|---|
| Weight capacity | 125 lb (56.7 kg) |
| VESA mounting pattern | 200 x 200 mm - 862 x 517 mm |
| Interface | Not included - order the required PSB interface separately |
| Extension | 24.88 in from wall; minimum depth 3.38 in (8.6 cm) |
| Swivel | Up to 90 degrees left or right, depending on screen size |
| Tilt | +5 / -15 degrees (Centris) |
| Wall stud compatibility | 16 in (406 mm) on centre; TAA compliant |












